Johnson Controls Qolsys IQ Smart Dimmer 700 Series Z-Wave module, Smart Outlet

Description The Qolsys IQ Smart Dimmer plugs into a standard outlet and turns nearly any plug-in device into a smart device. It works with incandescent and most dimmable fluorescent (CFL) and LED lights. It is redesigned to be smaller than its predecessor with a more discreet appearance so that it does not block the second outlet. In addition, it also serves as a Z-Wave repeater for other nearby Z-Wave devices. There are some devices that you should not use with the Qolsys IQ Dimmer. Motor-operated appliances, non-dimmable fluorescent lighting fixtures, and transformer-powered appliances are not compatible. Also, the Qolsys QZ2141-840 does not support devices that require a ground prong receptacle. In addition, any lighting device that is connected to this module must not exceed 2.5A at 300W if incandescent, 65W if dimmable CFL or LED, 120 Volts AC at 60 Hz. It is always recommended to first exclude any Z-Wave device from the network before attempting to include it. Devices are often tested at the factory without being set back to factory default afterward. Although the IQ Dimmer is manufactured by Qolsys, it should work with any Z-Wave controller that supports Z-Wave, Z-Wave Plus, or Z-Wave Plus V2. Just keep in mind that mixing Z-Wave and Z-Wave Plus devices on the same network may introduce some limitations that the IQ Dimmer might not otherwise have. As a Z-Wave Plus V2 device, the IQ Dimmer supports S2 security and SmartStart. The QR Code for SmartStart can be fou..